Curtis 1314 Pc Programming Station Software Download
Curtis 1314 PC Programming Station Software Download
If you are looking for a powerful and easy-to-use tool to program and troubleshoot Curtis speed controllers and auxiliary devices, you may want to download the Curtis 1314 PC Programming Station Software. This software allows you to view and adjust controller programmable parameters, monitor real-time data, perform diagnostic tests, record controller data, and much more. In this article, we will show you how to download and install the Curtis 1314 PC Programming Station Software on your Windows PC.
What is the Curtis 1314 PC Programming Station Software?
The Curtis 1314 PC Programming Station Software is a Windows-based application that communicates with Curtis speed controllers and auxiliary devices via a serial or USB connection. The software can be used by vehicle OEMs, dealers, and service engineers to perform various tasks, such as:
Download: https://vittuv.com/2w2WCA
Viewing and adjusting controller programmable parameters
Monitoring real-time data such as battery voltage, motor current, throttle input, etc.
Performing diagnostic tests such as fault code reading, motor identification, etc.
Recording controller data such as operating history, fault log, etc.
Updating controller firmware
Creating custom parameter files and templates
Printing reports and graphs
The software supports a wide range of Curtis products, including AC induction motor controllers, PMAC motor controllers, DC series motor controllers, DC shunt motor controllers, DC permanent magnet motor controllers, DC SepEx motor controllers, system controllers, I/O modules, gauges, displays, and more. You can find the complete list of supported products in the [datasheet] of the software.
How to download the Curtis 1314 PC Programming Station Software?
To download the Curtis 1314 PC Programming Station Software, you need to have a valid license key from Curtis Instruments. You can purchase a license key from [Curtis Instruments website] or from an authorized distributor. Once you have the license key, you can follow these steps to download the software:
Go to the [Curtis Instruments website] and click on the "Products" tab.
Select "Programming" from the drop-down menu.
Click on the "1314 PC Programming Station" link.
Click on the "Download" button and enter your license key.
Save the file to your computer and unzip it.
How to install the Curtis 1314 PC Programming Station Software?
To install the Curtis 1314 PC Programming Station Software on your Windows PC, you need to have a compatible interface device that connects your PC to the Curtis controller or device. You can use either a serial cable or a USB interface box. The serial cable is compatible with most Curtis products, but it requires a serial port on your PC or a USB-to-serial adapter. The USB interface box is compatible with all Curtis products that support CAN communication, but it requires a USB port on your PC. You can purchase either of these interface devices from [Curtis Instruments website] or from an authorized distributor. Once you have the interface device, you can follow these steps to install the software:
Connect the interface device to your PC and to the Curtis controller or device.
If you are using a USB interface box, install the driver for it from the CD-ROM that came with it or from the [Curtis Instruments website].
Run the setup.exe file from the folder where you unzipped the software file.
Follow the instructions on the screen to complete the installation.
Launch the software from the desktop shortcut or from the Start menu.
How to use the Curtis 1314 PC Programming Station Software?
To use the Curtis 1314 PC Programming Station Software, you need to select the correct product type and model from the software menu. The software will automatically detect the controller or device that is connected to your PC and display its parameters and data. You can then use the software to view and adjust the parameters, monitor the data, perform the tests, record the data, update the firmware, create the files, print the reports, and more. You can find detailed instructions on how to use the software in the [manual] of the software.
Conclusion
The Curtis 1314 PC Programming Station Software is a powerful and easy-to-use tool that can help you program and troubleshoot Curtis speed controllers and auxiliary devices. You can download and install the software on your Windows PC with a valid license key and a compatible interface device. You can then use the software to perform various tasks such as viewing and adjusting parameters, monitoring data, performing tests, recording data, updating firmware, creating files, printing reports, and more. If you have any questions or issues with the software, you can contact Curtis Instruments customer service or technical support for assistance.